This article includes two documents (located at the bottom of this page as attachments) for general and specific requirements when configuring AVPro's MXNet network switches.

​

For a basic overview of connecting to the switch, accessing the CLI, and examples of commands used to configure an MXNet switch, see this KB Article.
​

​

Included in the Configuration Guide:
​

1. Basic Management Configuration
​

2. Port Configuration
​

3. VLAN and MAC Address Configuration
​

4. MSTP Configuration
​

5. QoS and Flow-based Redirection Configuration
​

6. L3 Forward and ARP, ND Configuration
​

7. DHCP Configuration
​

8. Routing Protocol
​

9. Multicast Protocol
​

10. Security Function Configuration
​

11. Reliability Configuration
​

12. Flow Monitor Configuration
​

13. Debugging and Diagnosis
​

14. Network Time Management Configuration
​

15. PoE Configuration
​

16. VSF Configuration
​

17. Info-center Configuration
​

​

Included in the Command Guide:
​

1. Commands for Basic Switch Configuration
​

2. Commands for Port Configuration
​

3. Commands for VLAN and MAC Address Configuration
​

4. Commands for MSTP
​

5. Commands for QoS and Flow-based Redirection
​

6. Commands for Layer 3 Interface and ARP, ND
​

7. Commands for DHCP Server Configuration
​

8. Commands for Routing Protocol
​

9. Commands for Multicast Protocol
​

10. Commands for Security Function
​

11. Commands for Reliability
​

12. Commands for Flow Monitor
​

13. Commands for Debugging and Diagnosis
​

14. Commands for Network Time Management
​

15. Commands for PoE
​

16. Commands for VSF
​

17. Commands for Info-center

This article has 2 file attachments. View & download on the support portal.