XP 8v is a high-end control processor designed for automating electronic systems in various environments.
Product Overview
XP 8v features a 1GHz processor, 1GB RAM, and 512MB flash memory.
It includes eight I/O ports, relay outputs, RS-232 ports, and sense inputs.
Supports IR emitters and RTI power sensing modules.
Non-volatile memory retains configurations without power.
Installation & Operation
Programming is done via RTI’s Integration Designer software using USB or Ethernet.
Firmware updates are recommended and can be installed through the USB port.
Infrared Emitters
Each I/O port can drive up to four IR emitters directly.
Requires an amplified connecting block for more than four emitters.
IR output gain is adjustable for each port.
RS-232 Communication
Supports two-way control via eight RJ-45 output ports.
Ships with RJ-45 to DB-9 adapters for RS-232 connections.
Communication cabling should be limited to 50 feet depending on baud rate.
Sense Inputs / Relay-Trigger Outputs
Sense inputs can trigger events based on contact closure or voltage.
Relays can be configured for dry contact closure or voltage trigger output.
Power Supply
Powered by a 12VDC/1A power supply.
Safety and Warranty
Follow safety instructions and retain them for future reference.
Warranty covers three years for products, excluding consumables.
📎 Attachments (1)