Skip to main content

T1-B+ Operation Guide

Key Features: Fully customizable and programmable universal controller. Combines multiple factory remote controls into one ergonomic interface. Dual RF capability: 433MHz and 2.4GHz (Zigbee® technology). Eight source and four general-purpose ...

Written by Isaiah

Key Features:

  • Fully customizable and programmable universal controller.

  • Combines multiple factory remote controls into one ergonomic interface.

  • Dual RF capability: 433MHz and 2.4GHz (Zigbee® technology).

  • Eight source and four general-purpose assignable/programmable keypad buttons.

  • Transmits IR and RF (or both on a single button press).

  • Optional RF receiver for transmission through walls and cabinets.

  • Includes Lithium-Ion battery and docking station.

  • Docking station backlight can be disabled.

Product Contents:

  • T1-B+ universal system controller.

  • Docking station.

  • International 5V/2A power supply.

  • Reference guide.

  • Two keycap clusters (32 keycaps per cluster).

  • Wall-mount bracket with screws and drywall anchors.

  • Laser Shark Certificate for free custom engraving.

  • Firmware Update Notification.

Safety Suggestions:

  • Follow instructions and heed warnings.

  • Keep away from heat sources, water, and moisture.

  • Avoid object and liquid entry into the unit.

  • Refer servicing to qualified personnel.

Limited Warranty:

  • 3-year warranty (1 year for battery packs).

  • Covers defects in material and workmanship.

  • Excludes damage from misuse, neglect, unauthorized repairs, and other specified causes.

Charging the T1-B+ Battery:

  • Lithium-ion battery with no memory effect.

  • Fully discharged battery charges in 2-4 hours.

  • Status LED illuminates red when battery is low.

Docking Station:

  • Can be placed on a flat surface or wall-mounted.

  • LED indicates charging status (red for charging, blue for fully charged).

  • Backlight can be turned off using a dip switch.

Installing Keycap Labels:

  • Bezel removal and keycap installation process detailed.

  • Adhesive recommendations for permanent keycap attachment.

Programming the T1-B+:

  • Requires RTI’s Integration Designer® software (Windows XP or higher).

  • USB A to Mini B cable included in RTI IR-PRO dealer kit.

  • Source buttons can be programmed for commands, macros, or active source pages.

Contacting RTI:

  • Address: Remote Technologies Incorporated, 5775 12th Avenue East, Suite 180, Shakopee, MN 55379.

  • Phone: (952) 253-3100.

Service & Support:

  • Technical support available via phone or email.

  • Provide detailed information about hardware/software issues for troubleshooting.

FCC Notice:

  • Complies with Part 15 of FCC Rules.

  • Operation subject to conditions regarding interference.

Declaration of Conformity:

Did this answer your question?