By: Coupe Automation | Version: 1.40 | Updated: April 1, 2026

Source: https://driverstore.rticontrol.com/driver/coupe-automation-http-commander

This driver can run system macros based on http commands from an external browser or other program. It currently supports GET and POST commands.

The driver will also serve variable values to an external requestor using JSON notation for variable names and values.

HTTP to XP Driver

Configuration Parameters:

License Key - Full functionality license key.

Enable Basic Authentication - Check this box to enable basic username/password authentication.

HTTP Output Communication Settings

HTTP URL - The URL where you want to send GET and POST commands.

HTTP Port - The port for sending GET and POST commands. SSL port is usually 443 (HTTPS). Port 80 is for standard HTTP output.

Server Communication Settings

TCP Port Number - This is the TCP Port Number to listen on and use in GET and POST commands.

Macro Names - Configure each system macro that you want to provide to the external world. You can configure up to 50 macros.

Events - You can configure up to 50 driver events.

Variables - You can configure up to 50 flags, integers and string variables to be served to an external requestor.

Commands

Send GET / Send POST - Sends GET or POST HTTP command with command, content type, and data content parameters.

Trigger Event - Call this function to directly trigger a driver event. This is for testing purposes.

You can test this driver for one hour after download or reboot on your XP processor. If you like it and it works for you, you can purchase a license key.