By: Clever AV Solutions | Version: 1.0 | Updated: May 26, 2026
Driver Instructions
Generic TCP Server
This driver allows a TCP client device to connect to the RTI processor and trigger event-based programming.
Up to 100 events are allowed.
Each command MUST end with (_x) with 'x' being the command number.
If command 1 was to be "open gate" it would look like: open gate_1
If command 2 was to be "close gate" it would look like: close gate_2
Carriage returns and/or line feeds are not required.
System Requirements & Prerequisites
RTI System Requirements
Integration Designer: 11.12 or later.
XP FW: 22.3.31 or later.
Network Requirements
You must define a port for the driver to open for client communications.
The port number you define MUST be higher than 1024.
Driver Features
Commands: The driver features NO commands. It is purely event based.
Variables: The driver has no feedback variables. It is purely event based.
Events: Each command has a corresponding event in the driver events section. In each event, place what you want to happen when the driver receives the applicable command.
System Testing
Integration Designer 11.14.1
XP Processor Model: XP-3
XP Processor Firmware: 25.9.24
Support Contact
RTI Control