By: RTI | Version: 1.34 | Updated: May 22, 2026
Driver Instructions
This driver has been designed to provide two-way control for AudioControl CMSeries products and Director Series via TCP/IP. This is the newer Janus created combination driver.
Version History:
Version - 1.0 | Release Date - 10/3/2025 | Official initial release
Version - 1.1 | Release Date - 10/10/2025 | Added ability to control multiple devices; Added Dante functionality
Version - 1.2 | Release Date - 11/25/2025 | Fixed an issue requiring all config setting to be set; Source names can be duplicated across sources; Added (set as room audio source) tick box when adding zones to project; Added tags for adding zones to a group and removing zone from a group
Version - 1.3 | Release Date - 12/4/2025 | Fixed an issue causing Dante Input to be available for selection on models of the same type; Updated user guide for more in depth instructions on routing; Added multi-switching support
Version - 1.31 | Release Date - 12/12/2025 | Update Driver Version number to better reflect driver changes
Version - 1.32 | Release Date - 01/19/2026 | If a volume command is sent to a zone or group, the driver now ensures that the zone or group is unmuted
Version - 1.33 | Release Date - 05/14/2026 | Fixed duplicate items appearing in multi-select function parameter drop-down list
Version - 1.34 | Release Date - 05/15/2026 | Further multi-select function and variable fixes
AudioControl CMx-750 and Director series | IP Control | Version 1.34
Introduction
This driver has been designed to provide two-way control of the AudioControl CM & Director Series of matrix amplifiers, via Ethernet. The driver automatically exposes the available commands and variables depending on the models chosen in the properties.
Driver Features
• Local Routing
• Dante Routing
• Zone Control and Feedback e.g. Bass, Treble and Presets, Advanced Audio
• Device Control and Feedback e.g. Power status, Voltage feedback
• Grouping Control
• Dynamic Generation of RTI Tags
System Requirements & Prerequisites
RTI System Requirements
• Integration Designer: 11.2 or later.
• XP FW: 25.1.27 or later.
Supported models: CM Series (CM2-750, CM2-750D, CM3-750, CM3-750D, CM4-750, CM4-750D), Director Series (D2800, D4600), M Series (M4800, M4800D, M4840, M6400, M6800, M6800D)
Support Contact
If you encounter any issues with the driver, please contact us at [email protected], and we will be happy to assist however needed.