By: RTI | Version: 2.14 | Updated: Feb. 20, 2026

Source: https://driverstore.rticontrol.com/driver/avproedge_ac_max_24

This driver has been designed to provide two-way control of AVProEdge AC MAX 24 via IP or RS232.

Version History:

Version 2.14 – 12th February 2026: Added Play Chime Functionality (Only on supported models); Fixed issue causing volume to Increment from 1 if a Zone was muted

Version 2.13 – 9th-December 2025: Add room audio volume source tick box.

Version 2.12 – 4-December 2025: Prevent crash when config settings not changed from default.

Version 2.1 – 18-November 2025: Dynamic naming of sources, zones and tags. Improved tagging.

Version 2.0 – 03-November 2025: Updated Tags; Updated User guide and Apex Demo; Updated EQ Mode Selection; Support for the AC-MAX-24-C model.

Version 1.0 – 01-November 2022: Initial Release – AVPro Edge

AVPro Edge | AC-MAX-24 | 2.14

Introduction

This driver has been designed to provide two-way control of AVPro Edge AC-MAX-24 device, via TCP/IP and Serial (RS232).

Driver Features

• Two-way via TCP/IP and Serial (RS232) communication

• Audio routing

• Volume, balance, EQ, and audio enable controls

System Requirements & Pre-requisites

RTI System Requirements

• Integration Designer: Apex ID 11

• XP FW: 25.1.27 or later

Manufacturer's Device Requirements

• AC-MAX-24

• Model FW Version: 1.19 (A/B); 1.34 (C)

System Testing

Integration Designer: Version 11.12

XP Processor Model: XP-3

XP Processor Firmware: 25.9.24

Device Model(s): AC-MAX-24/AC-MAX-24-C