By: RTI | Version: 3.01 | Updated: March 13, 2026
Driver Instructions
This driver has been designed to provide control for the AVProEdge ConferX Suite
Version History:
Version 3.01 – 10th-March 2025: Added Set Mic Level (only on supported models); Added Event and Feedback Route to Mic function; Driver now auto updates Input Tag names when they are changed in the config settings
Version 3.00 – 5th-Feb 2025: Add updated driver for ID11, Tagging, Apex Demo, Userguide
Version 2.13 – 9th-December 2025: Add room audio volume source tick box.
Version 2.8 – 25th July 2024: Returned Model to config settings as was required when adding a driver to project from scratch
Version 2.7 – 8th Feb 2024: Added RS232 Passthrough
Version 2.6 - 20th Nov 2023: Updated all volume ranges for all models to be 0-100 on FW 2.12+
AVPro Edge | ConferX | 3.01
Introduction
This driver has been designed to provide two-way control of AVPro Edge ConferX Series of devices, via TCP/IP and Serial (RS232).
Driver Features
• Two-way via TCP/IP and Serial (RS232) communication
• Input routing
• Audio and Video Setup
• RS232-Passthrough
System Requirements & Pre-requisites
RTI System Requirements
• Tested on Integration Designer: Apex ID 11 11.13.4
• Tested on XP8v FW: 25.9.24
Manufacturer's Device Requirements
• ConferX Series Device
System Testing
Integration Designer: Version 11.12
XP Processor Model: XP-8v
XP Processor Firmware: 25.9.24
Device Model(s): AC-CX42-AUHD, AC-CX62-AUHD, AC-CX84-AUHD, AC-CX84