By: RTI | Version: 1.03 | Updated: March 13, 2026
Driver Instructions
Description:
This driver is for the Biamp Tesira Forte series of DSP processors.
Version History:
Version 1.00: Initial release
Version 1.01: Fixes issue with level commands not executing properly.
Version 1.02: Fixed issue with heartbeat polling
Version 1.03: Reconciled previous versioning and heartbeat changes
Biamp Tesira Forte
This driver is for the Biamp Tesira Forte series of DSP processors.
Note - This driver does not currently support TI or VOIP dialing objects. The Raw command may be used for adding basic TI/VOIP functions but feedback is not currently available.
Connection Settings
• Serial Port (No Security) - Use this setting when Serial control is preferred.
• Network (No Security) - Use this setting when Ethernet control is preferred.
• Network (With Security) - Use this setting when Ethernet control is preferred and securing the Biamp Tesira is required.
Control Points
Routing Output Control Point Count - Enter the number Routing Output Control Points to be used. Up to 32 Routing Output Control Points are supported, each with up to 32 sources.
Level Control Point Count - Enter the number of Level Control Points to be used. Up to 64 Level Control Points are supported.
State Control Point Count - Enter the number of State Control Points to be used. Up to 64 State Control Points are supported.
Input Gain Control Point Count - Enter the number of Input Gain Control Points to be used. Up to 24 Input Gain Control Points are supported.
Output Gain Control Point Count - Enter the number of Output Gain Control Points to be used. Up to 16 Output Gain Control Points are supported.
Combiner Control Point Count - Enter the number of Combiner Control Points to be used. Up to 8 Combiner Control Points are supported.
Preset Count - Enter the number of Presets to be used. Up to 100 presets are supported.