By: RTI | Version: 2.31 | Updated: April 2, 2026
Driver Instructions
Description: This driver supports the Caséta line of dimmers, plug-in modules and shades from Lutron.
Please Note: This driver works with the Caseta Smart Bridge Pro and/or RA2 Select Main Repeater.
Version History:
Version 2.2: adds pushed/released events for ID 1 buttons 1-50, adds pushed/released events for 4 button Pico devices, updated connectivity and initialization routines.
Version 2.24: includes improved filtering for unwanted responses.
Version 2.25: adds support for RA2 Select.
Version 2.26: Updated Driver Properties to allow 75 devices when using Caseta.
Version 2.3: Adds support for Autoprogramming.
Version 2.31: Updated Driver Notes.
Lutron Caseta / RA2 Select
This driver was designed for use with a Lutron Caseta Smart Bridge Pro interface (LBDGPRO) or a RA2 Select Main Repeater (RR-SEL-REP2-BL).
Driver Mode Settings: Select Caseta or RA2 Select as appropriate.
Connection Settings: Network (TCP). The TCP Address should match the address of the Caseta/RA2 Select. Port 23 is used for the telnet session. Default username/password is lutron/integration.
Device Configuration Settings: Last Device ID Used - Enter the last device ID programmed in the Lutron system. The driver supports a maximum of 50 IDs for Caseta and 100 IDs for RA2 Select.
Driver Notes: The Caseta Smart Bridge Pro or RA2 Select Main Repeater must be addressed to ID 1. 4 Button Pico devices use buttons 8-11 for buttons 1-4 respectively.