By: RTI | Version: 1.0 | Updated: May 22, 2026
Driver Instructions
This driver provides IP control of the LynTec RPC panel over HTTP. It supports individual breaker control, zone-based group control, system events, and automatic status polling with real-time feedback for all breaker, zone, and event states.
Version History: v1.0 - Initial release
LynTec | IP Only | Version 1.0
Introduction & Manufacturer Profile
LynTec designs and manufactures intelligent power control solutions for professional AV, theatrical, and architectural lighting applications. The LynTec RPC (Remote Power Control) panel provides centralized network control of circuit breakers, breaker zones, and system events.
Driver Features
Breaker Control - Turn individual breakers ON, OFF, or Toggle (up to 167 breakers)
Zone Control - Turn breaker zones ON, OFF, or Toggle (up to 12 zones)
Event Control - Trigger system events including All Breakers ON/OFF and Hurry Off
Status Feedback - Real-time state feedback for all breakers, zones, and events
Auto Reconnect - Automatic reconnection on connection loss
Status Polling - Automatic polling every 15 seconds
System Requirements & Prerequisites
RTI System Requirements: Integration Designer 11.5 or above, XP Firmware 24.x or above
Device Requirements: LynTec RPC Panel, Network-enabled, HTTP control enabled (default)
Driver Configuration
Enter the IP Address of the RPC panel. Set the Port (default: 80). Select the Number of Breakers matching your system (20, 42, 84, 126, or 167).
Functions: Breaker On/Off/Toggle, Zone On/Off/Toggle, All Breakers On/Off, Hurry Off, Event On/Off.
System Testing
Integration Designer: 11.13, XP Processor Model: XP-6s, XP Processor Firmware: 25.9.24, Device Model: LynTec RPC Panel
Support Contact: Remote Technologies Inc. Phone: +1 952-253-3100, Email: [email protected]