By: RTI | Version: 1.0 | Updated: May 26, 2026
Driver Instructions
This is a RTI driver for the dynamic display and switching of IP camera video.
The driver supports up to 32 cameras configured via ONVIF auto-discovery or manually entered stream URLs.
Dynamic Camera Feeds only work on IST panels or RtiPanel (iOS or Android)
Version History: v1.0 - Initial release
System Requirements & Prerequisites
RTI System Requirements: Integration Designer: 11.15 or later. RTiPanel iOS V2.3.9 or later, Android V3.4.12 or later. IST Firmware V26.3.17 or later.
Driver Configuration
Add the driver to the global area. Select Driver Configuration Mode: ONVIF Discovery or Manual Mode.
ONVIF Discovery: The driver scans the network for ONVIF-compliant IP cameras and retrieves their stream URLs automatically.
Manual Mode: No network scan is performed. Cameras and stream URLs are entered manually.
Dynamic Stream Settings: Number of Cameras (up to 32), Default Stream, Camera Cycle Settings.
System Functions
Switch Camera Feed - Cycle Cameras, Next Camera, Previous Camera, Camera N.
Camera Feed Control – Refresh Camera Feed.
PTZ Controls (Only available for PTZ cameras): PTZ Move, PTZ Zoom, PTZ Relative Move, PTZ Absolute Move, PTZ Home, PTZ Preset.
System Variables
Current Feed Name, Current Feed (stream URL), Camera Cycle Active, Camera N Information (Name, Feed, Active).
Driver Testing
Integration Designer 11.14, XP Processor Model: XP-8v, XP Processor Firmware: 25.9.24
Support Contact
RTI Control, + 1.952.253.3137, [email protected]